configs: lx2160: enable DM support for pcf2127 rtc

Enable related configs on all lx2160ardb boards to support pcf2127
rtc DM feature.

Also remove SYS_I2C_MXC_I2Cx, where x is from 1 to 8 from
Kconfig.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -235,14 +235,6 @@ config ARCH_LX2160A
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
-	select SYS_I2C_MXC_I2C5
-	select SYS_I2C_MXC_I2C6
-	select SYS_I2C_MXC_I2C7
-	select SYS_I2C_MXC_I2C8
 	imply DISTRO_DEFAULTS
 	imply PANIC_HANG
 	imply SCSI

configs/lx2160aqds_tfa_SECURE_BOOT_defconfig

@@ -61,3 +61,12 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y

configs/lx2160aqds_tfa_defconfig

@@ -57,3 +57,12 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y

configs/lx2160ardb_tfa_SECURE_BOOT_defconfig

@@ -58,3 +58,10 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y

configs/lx2160ardb_tfa_defconfig

@@ -57,3 +57,10 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y