dm: arm64: ls1046a: add i2c DM support

This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1046A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -107,11 +107,11 @@ config ARCH_LS1046A
 	select SYS_FSL_SRDS_2
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
-	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC if !DM_I2C
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	select SYS_I2C_MXC_I2C3 if !DM_I2C
+	select SYS_I2C_MXC_I2C4 if !DM_I2C
 	imply SCSI
 	imply SCSI_AHCI
 

arch/arm/dts/fsl-ls1046a-frwy.dts

@@ -32,3 +32,6 @@
 
 };
 
+&i2c0 {
+	status = "okay";
+};

arch/arm/dts/fsl-ls1046a-qds.dtsi

@@ -80,3 +80,7 @@
 &sata {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};

arch/arm/dts/fsl-ls1046a-rdb.dts

@@ -43,3 +43,11 @@
 &sata {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};

arch/arm/include/asm/gpio.h

@@ -5,7 +5,7 @@
 	!defined(CONFIG_ARCH_LS1028A) && !defined(CONFIG_ARCH_LS2080A) && \
 	!defined(CONFIG_ARCH_LS1088A) && !defined(CONFIG_ARCH_ASPEED) && \
 	!defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_LS1043A) && \
-	!defined(CONFIG_ARCH_U8500) && \
+	!defined(CONFIG_ARCH_LS1046A) && !defined(CONFIG_ARCH_U8500) && \
 	!defined(CONFIG_CORTINA_PLATFORM)
 #include <asm/arch/gpio.h>
 #endif

board/freescale/ls1046afrwy/ls1046afrwy.c

@@ -36,11 +36,24 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
 
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -149,7 +162,7 @@ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
 	sec_init();
 #endif
 
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	return 0;
 }
 

board/freescale/ls1046aqds/ls1046aqds.c

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -269,11 +270,23 @@ u32 get_lpuart_clk(void)
 }
 #endif
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
 
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -288,8 +301,10 @@ int dram_init(void)
 	 * When resuming from deep sleep, the I2C channel may not be
 	 * in the default channel. So, switch to the default channel
 	 * before accessing DDR SPD.
+	 *
+	 * PCA9547 mount on I2C1 bus
 	 */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	fsl_initdram();
 #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
 	defined(CONFIG_SPL_BUILD)
@@ -302,7 +317,7 @@ int dram_init(void)
 
 int i2c_multiplexer_select_vid_channel(u8 channel)
 {
-	return select_i2c_ch_pca9547(channel);
+	return select_i2c_ch_pca9547(channel, 0);
 }
 
 int board_early_init_f(void)
@@ -315,8 +330,10 @@ int board_early_init_f(void)
 	u8 uart;
 #endif
 
+#ifdef CONFIG_SYS_I2C
 #ifdef CONFIG_SYS_I2C_EARLY_INIT
 	i2c_early_init_f();
+#endif
 #endif
 	fsl_lsch2_early_init_f();
 
@@ -394,7 +411,7 @@ int misc_init_r(void)
 
 int board_init(void)
 {
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 
 #ifdef CONFIG_SYS_FSL_SERDES
 	config_serdes_mux();

configs/ls1046afrwy_tfa_defconfig

@@ -62,3 +62,5 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_RTL8152=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046aqds_SECURE_BOOT_defconfig

@@ -60,3 +60,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046aqds_defconfig

@@ -62,3 +62,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046aqds_lpuart_defconfig

@@ -64,3 +64,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046aqds_nand_defconfig

@@ -70,3 +70,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046aqds_qspi_defconfig

@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046aqds_sdcard_ifc_defconfig

@@ -80,3 +80,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046aqds_sdcard_qspi_defconfig

@@ -74,3 +74,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046aqds_tfa_SECURE_BOOT_defconfig

@@ -61,3 +61,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046aqds_tfa_defconfig

@@ -71,3 +71,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046ardb_emmc_defconfig

@@ -73,3 +73,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046ardb_qspi_SECURE_BOOT_defconfig

@@ -55,3 +55,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y

configs/ls1046ardb_qspi_defconfig

@@ -57,3 +57,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y