arch/arm/dts/fsl-ls2080a.dtsi

 // SPDX-License-Identifier: GPL-2.0+ OR X11
 /*
- * Freescale ls2080a SOC common device tree source
+ * NXP ls2080a SOC common device tree source
  *
+ * Copyright 2020 NXP
  * Copyright 2013-2015 Freescale Semiconductor, Inc.
  */
 
@@ -133,7 +134,7 @@
 		dr_mode = "host";
 	};
 
-	pcie@3400000 {
+	pcie1: pcie@3400000 {
 		compatible = "fsl,ls-pcie", "snps,dw-pcie";
 		reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
 		       0x00 0x03480000 0x0 0x80000   /* lut registers */
@@ -148,7 +149,7 @@
 			  0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
 
-	pcie@3500000 {
+	pcie2: pcie@3500000 {
 		compatible = "fsl,ls-pcie", "snps,dw-pcie";
 		reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
 		       0x00 0x03580000 0x0 0x80000   /* lut registers */
@@ -163,7 +164,7 @@
 			  0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
 
-	pcie@3600000 {
+	pcie3: pcie@3600000 {
 		compatible = "fsl,ls-pcie", "snps,dw-pcie";
 		reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
 		       0x00 0x03680000 0x0 0x80000   /* lut registers */
@@ -178,7 +179,7 @@
 			  0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
 
-	pcie@3700000 {
+	pcie4: pcie@3700000 {
 		compatible = "fsl,ls-pcie", "snps,dw-pcie";
 		reg = <0x00 0x03700000 0x0 0x80000   /* dbi registers */
 		       0x00 0x03780000 0x0 0x80000   /* lut registers */

arch/arm/dts/fsl-lx2160a-qds.dts

@@ -13,7 +13,4 @@
 / {
 	model = "NXP Layerscape LX2160AQDS Board";
 	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
-	aliases {
-		spi0 = &fspi;
-	};
 };

arch/arm/dts/fsl-lx2160a-qds.dtsi

@@ -2,12 +2,18 @@
 /*
  * NXP LX2160AQDS common device tree source
  *
- * Copyright 2018-2019 NXP
+ * Copyright 2018-2020 NXP
  *
  */
 
 #include "fsl-lx2160a.dtsi"
 
+/ {
+	aliases {
+		spi0 = &fspi;
+	};
+};
+
 &dpmac17 {
 	status = "okay";
 	phy-handle = <&rgmii_phy1>;
@@ -251,6 +257,20 @@
 	};
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
 &sata0 {
 	status = "okay";
 };

arch/arm/dts/fsl-lx2160a.dtsi

@@ -325,7 +325,7 @@
 
 	};
 
-	pcie@3400000 {
+	pcie1: pcie@3400000 {
 		compatible = "fsl,lx2160a-pcie";
 		reg = <0x00 0x03400000 0x0 0x80000   /* PAB registers */
 		       0x00 0x03480000 0x0 0x40000   /* LUT registers */
@@ -340,7 +340,7 @@
 			  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
 
-	pcie@3500000 {
+	pcie2: pcie@3500000 {
 		compatible = "fsl,lx2160a-pcie";
 		reg = <0x00 0x03500000 0x0 0x80000   /* PAB registers */
 		       0x00 0x03580000 0x0 0x40000   /* LUT registers */
@@ -356,7 +356,7 @@
 			  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
 
-	pcie@3600000 {
+	pcie3: pcie@3600000 {
 		compatible = "fsl,lx2160a-pcie";
 		reg = <0x00 0x03600000 0x0 0x80000   /* PAB registers */
 		       0x00 0x03680000 0x0 0x40000   /* LUT registers */
@@ -371,7 +371,7 @@
 			  0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
 
-	pcie@3700000 {
+	pcie4: pcie@3700000 {
 		compatible = "fsl,lx2160a-pcie";
 		reg = <0x00 0x03700000 0x0 0x80000   /* PAB registers */
 		       0x00 0x03780000 0x0 0x40000   /* LUT registers */
@@ -386,7 +386,7 @@
 			  0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
 
-	pcie@3800000 {
+	pcie5: pcie@3800000 {
 		compatible = "fsl,lx2160a-pcie";
 		reg = <0x00 0x03800000 0x0 0x80000   /* PAB registers */
 		       0x00 0x03880000 0x0 0x40000   /* LUT registers */
@@ -401,7 +401,7 @@
 			  0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
 
-	pcie@3900000 {
+	pcie6: pcie@3900000 {
 		compatible = "fsl,lx2160a-pcie";
 		reg = <0x00 0x03900000 0x0 0x80000   /* PAB registers */
 		       0x00 0x03980000 0x0 0x40000   /* LUT registers */

arch/arm/dts/fsl-lx2162a-qds-17-x.dts

+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for SERDES protocol 17.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2162a-qds-sd1-17.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 17.x)";
+	compatible = "fsl,lx2162aqds", "fsl,lx2160a";
+
+};

arch/arm/dts/fsl-lx2162a-qds-18-x.dts

+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for SERDES protocol 18.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2162a-qds-sd1-18.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 18.x)";
+	compatible = "fsl,lx2162aqds", "fsl,lx2160a";
+
+};

arch/arm/dts/fsl-lx2162a-qds-20-x.dts

+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for SERDES protocol 20.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2162a-qds-sd1-20.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 20.x)";
+	compatible = "fsl,lx2162aqds", "fsl,lx2160a";
+
+};

arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi

+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 17
+ *
+ * Some assumptions are made:
+ *    * mezzanine card M8 is connected to IO SLOT1 (25g-aui for DPMAC 3,4,5,6)
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&inphi_phy0>;
+	phy-connection-type = "25g-aui";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&inphi_phy1>;
+	phy-connection-type = "25g-aui";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&inphi_phy2>;
+	phy-connection-type = "25g-aui";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-handle = <&inphi_phy3>;
+	phy-connection-type = "25g-aui";
+};
+
+&emdio1_slot1 {
+	inphi_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x0>;
+	};
+
+	inphi_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x1>;
+	};
+
+	inphi_phy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x2>;
+	};
+
+	inphi_phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x3>;
+	};
+};

arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi

+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 18
+ *
+ * Some assumptions are made:
+ *    * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4)
+ *    * mezzanine card M13/M8 is connected to IO SLOT6 (25g-aui for DPMAC 5,6)
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&aquantia_phy1>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&aquantia_phy2>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&inphi_phy0>;
+	phy-connection-type = "25g-aui";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-handle = <&inphi_phy1>;
+	phy-connection-type = "25g-aui";
+};
+
+&emdio1_slot1 {
+	aquantia_phy1: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+
+	aquantia_phy2: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x1>;
+	};
+};
+
+&emdio1_slot6 {
+	inphi_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x0>;
+	};
+
+	inphi_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x1>;
+	};
+};

arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi

+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 20
+ *
+ * Some assumptions are made:
+ *    * Mezzanine card M8 is connected to IO SLOT1
+ *        (xlaui4 for DPMAC 1)
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac1 {
+	status = "okay";
+	phy-handle = <&cortina_phy1_0>;
+	phy-connection-type = "xlaui4";
+};
+
+&emdio1_slot1 {
+	cortina_phy1_0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+};

arch/arm/dts/fsl-lx2162a-qds.dts

+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2162AQDS Board";
+	compatible = "fsl,lx2162aqds", "fsl,lx2160a";
+
+	aliases {
+		pcie@3500000 {
+			status = "disabled";
+		};
+
+		pcie@3800000 {
+			status = "disabled";
+		};
+
+		pcie@3900000 {
+			status = "disabled";
+		};
+	};
+};
+
+&usb1 {
+	status = "disabled";
+};

arch/arm/dts/imx53-ppd-uboot.dtsi

@@ -28,7 +28,7 @@
 		#size-cells = <1>;
 
 		vpd@0 {
-			reg = <0 1022>;
+			reg = <0 800>;
 		};
 
 		bootcount: bootcount@1022 {

arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi

-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2-u-boot.dtsi>
-
-&lcd_panel {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu_disp>;
-	enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	backlight = <&backlight>;
-};

arch/arm/dts/imx6dl-aristainetos2_4.dts

-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2 board
- * parts for 4.3 inch LG display on spi1 port0
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-
-#include "imx6dl-aristainetos2_4.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 4";
-	compatible = "fsl,imx6dl";
-
-};
-
-&ecspi1 {
-	lcd_panel: display@0 {
-		compatible = "lg,lg4573";
-		spi-max-frequency = <10000000>;
-		reg = <0>;
-		power-on-delay = <10>;
-
-		display-timings {
-			480x800p57 {
-				native-mode;
-				clock-frequency = <27000027>;
-				hactive = <480>;
-				vactive = <800>;
-				hfront-porch = <10>;
-				hback-porch = <59>;
-				hsync-len = <10>;
-				vback-porch = <15>;
-				vfront-porch = <15>;
-				vsync-len = <15>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};

arch/arm/dts/imx6dl-aristainetos2_4.dtsi

-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2 board
- * parts for 4.3 inch LG display on the parallel port and atmel maxtouch
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-
-/ {
-	display0: disp0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp>;
-
-		port@0 {
-			reg = <0>;
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_ipu_disp: ipudisp1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
-		>;
-	};
-};

arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi

-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2-u-boot.dtsi>
-/ {
-	vdd_panel_reg: regulator-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "panel_regulator";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&panel0 {
-	power-supply = <&vdd_panel_reg>;
-};

arch/arm/dts/imx6dl-aristainetos2_7.dtsi

 // SPDX-License-Identifier: (GPL-2.0)
 /*
  * support for the imx6 based aristainetos2 board
- * parts for 7 inch LG display connected to the LVDS port and atmel maxtouch
+ * parts for 7 inch LG display connected to the LVDS port
  *
  * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
@@ -26,15 +26,6 @@
 	};
 };
 
-&i2c3 {
-	touch: touch@4d {
-		compatible = "atmel,maxtouch";
-		reg = <0x4d>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
 &ldb {
 	status = "okay";
 

arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi

-// SPDX-License-Identifier: GPL-2.0+ or X11
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2b-u-boot.dtsi>
-
-&lcd_panel {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu_disp>;
-	enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	backlight = <&backlight>;
-};

arch/arm/dts/imx6dl-aristainetos2b_4.dts

-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2b board
- * parts for 4.3 inch LG display on spi1 port1
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-
-#include "imx6dl-aristainetos2_4.dtsi"
-#include "imx6qdl-aristainetos2b.dtsi"
-
-/ {
-	model = "aristainetos2b i.MX6 Dual Lite Board 4";
-	compatible = "fsl,imx6dl";
-
-};
-
-&ecspi1 {
-	lcd_panel: display@0 {
-		compatible = "lg,lg4573";
-		spi-max-frequency = <10000000>;
-		reg = <1>;
-		power-on-delay = <10>;
-
-		display-timings {
-			480x800p57 {
-				native-mode;
-				clock-frequency = <27000027>;
-				hactive = <480>;
-				vactive = <800>;
-				hfront-porch = <10>;
-				hback-porch = <59>;
-				hsync-len = <10>;
-				vback-porch = <15>;
-				vfront-porch = <15>;
-				vsync-len = <15>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};

arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi

-// SPDX-License-Identifier: GPL-2.0+ or X11
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2b-u-boot.dtsi>
-/ {
-	vdd_panel_reg: regulator-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "panel_regulator";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&panel0 {
-	power-supply = <&vdd_panel_reg>;
-};