2021-01-27 snapshot

net-libs/gsoap/files/gsoap-2.8.70-parallel.patch

---- gsoap-2.8/gsoap/src/Makefile.am
-+++ gsoap-2.8/gsoap/src/Makefile.am
-@@ -5,6 +5,7 @@
- ## you have all needed files, that a GNU package needs
- AUTOMAKE_OPTIONS = foreign 1.4
- 
-+include MakefileManual
- 
- #LIBS=
- AM_YFLAGS=-d -v

net-libs/gsoap/files/gsoap-2.8.70-shared_libs.patch

---- gsoap-2.8/configure.ac
-+++ gsoap-2.8/configure.ac
-@@ -17,7 +17,7 @@
- AC_PROG_YACC
- AC_PROG_CPP
- AC_PROG_RANLIB
--#AM_PROG_LIBTOOL
-+AM_PROG_LIBTOOL
- AC_PROG_LN_S
- AC_PROG_AWK
- AC_PROG_INSTALL
-@@ -278,15 +278,17 @@
-     WSDL2H_EXTRA_LIBS="${WSDL2H_EXTRA_LIBS} -lgnutls -lgcrypt -lgpg-error -lz"
-     SAMPLE_INCLUDES=
-     SAMPLE_SSL_LIBS="-lgnutls -lgcrypt -lgpg-error -lz"
--    WSDL2H_SOAP_CPP_LIB="libgsoapssl++.a"
-+    WSDL2H_SOAP_CPP_STATIC_LIB="libgsoapssl++.a"
-+    WSDL2H_SOAP_CPP_SHARED_LIB="libgsoapssl++.la"
-   else
-     AC_MSG_RESULT(no)
-     WSDL2H_EXTRA_FLAGS="-DWITH_OPENSSL -DWITH_GZIP"
-     # compile with wsdl2h when OPENSSL is available
--    WSDL2H_EXTRA_LIBS="${WSDL2H_EXTRA_LIBS} -lssl -lcrypto -lz"
-+    WSDL2H_EXTRA_LIBS="${WSDL2H_EXTRA_LIBS} -lcrypto"
-     SAMPLE_INCLUDES=
-     SAMPLE_SSL_LIBS="-lssl -lcrypto -lz"
--    WSDL2H_SOAP_CPP_LIB="libgsoapssl++.a"
-+    WSDL2H_SOAP_CPP_STATIC_LIB="libgsoapssl++.a"
-+    WSDL2H_SOAP_CPP_SHARED_LIB="libgsoapssl++.la"
-   fi
-   if test -n "$ZLIB"; then
-     WSDL2H_EXTRA_FLAGS="-I${ZLIB}/include ${WSDL2H_EXTRA_FLAGS}"
-@@ -305,7 +307,8 @@
-   WSDL2H_EXTRA_FLAGS=
-   SAMPLE_SSL_LIBS=
-   SAMPLE_INCLUDES=
--  WSDL2H_SOAP_CPP_LIB="libgsoap++.a"
-+  WSDL2H_SOAP_CPP_STATIC_LIB="libgsoap++.a"
-+  WSDL2H_SOAP_CPP_SHARED_LIB="libgsoapssl++.la"
- fi
- AM_CONDITIONAL(WITH_OPENSSL, test "x$with_openssl" = "xyes" -a "x$with_gnutls" != "xyes")
- AC_SUBST(WITH_OPENSSL)
-@@ -313,7 +316,8 @@
- AC_SUBST(WSDL2H_EXTRA_LIBS)
- AC_SUBST(SAMPLE_INCLUDES)
- AC_SUBST(SAMPLE_SSL_LIBS)
--AC_SUBST(WSDL2H_SOAP_CPP_LIB)
-+AC_SUBST(WSDL2H_SOAP_CPP_SHARED_LIB)
-+AC_SUBST(WSDL2H_SOAP_CPP_STATIC_LIB)
- 
- # enable the compile of the samples
- AC_ARG_ENABLE(samples,
---- gsoap-2.8/gsoap/Makefile.am
-+++ gsoap-2.8/gsoap/Makefile.am
-@@ -49,6 +49,29 @@
- libgsoapssl___a_SOURCES = stdsoap2_ssl_cpp.cpp dom_cpp.cpp
- libgsoapssl___a_CXXFLAGS = $(SOAPCPP2_DEBUG) $(SOAPCPP2_NONAMESPACES) $(SOAPCPP2_NO_C_LOCALE) $(SOAPCPP2_IPV6) -D$(platform) $(WSDL2H_EXTRA_FLAGS) -DWITH_DOM -DWITH_COOKIES
- 
-+lib_LTLIBRARIES = libgsoap.la libgsoap++.la libgsoapck.la libgsoapck++.la libgsoapssl.la libgsoapssl++.la
-+SOVERSION = 0
-+libgsoap_la_SOURCES = stdsoap2.c dom.c
-+libgsoap_la_CFLAGS = $(SOAPCPP2_DEBUG) $(SOAPCPP2_NONAMESPACES) $(SOAPCPP2_IPV6) -D$(platform)
-+libgsoap_la_LDFLAGS = -version-info $(SOVERSION)
-+libgsoap___la_SOURCES = stdsoap2_cpp.cpp dom_cpp.cpp
-+libgsoap___la_CXXFLAGS = $(SOAPCPP2_DEBUG) $(SOAPCPP2_NONAMESPACES) $(SOAPCPP2_IPV6) -D$(platform)
-+libgsoap___la_LDFLAGS = -version-info $(SOVERSION)
-+libgsoapck_la_SOURCES = stdsoap2_ck.c dom.c
-+libgsoapck_la_CFLAGS = $(SOAPCPP2_DEBUG) $(SOAPCPP2_NONAMESPACES) $(SOAPCPP2_IPV6) -D$(platform) -DWITH_COOKIES
-+libgsoapck_la_LDFLAGS = -version-info $(SOVERSION)
-+libgsoapck___la_SOURCES = stdsoap2_ck_cpp.cpp dom_cpp.cpp
-+libgsoapck___la_CXXFLAGS = $(SOAPCPP2_DEBUG) $(SOAPCPP2_NONAMESPACES) $(SOAPCPP2_IPV6) -D$(platform) -DWITH_COOKIES
-+libgsoapck___la_LDFLAGS = -version-info $(SOVERSION)
-+libgsoapssl_la_SOURCES = stdsoap2_ssl.c dom.c
-+libgsoapssl_la_CFLAGS = $(SOAPCPP2_DEBUG) $(SOAPCPP2_NONAMESPACES) $(SOAPCPP2_IPV6) -D$(platform) $(WSDL2H_EXTRA_FLAGS) -DWITH_DOM -DWITH_COOKIES
-+libgsoapssl_la_LDFLAGS = -version-info $(SOVERSION)
-+libgsoapssl_la_LIBADD = -lssl -lcrypto -lz
-+libgsoapssl___la_SOURCES = stdsoap2_ssl_cpp.cpp dom_cpp.cpp
-+libgsoapssl___la_CXXFLAGS = $(SOAPCPP2_DEBUG) $(SOAPCPP2_NONAMESPACES) $(SOAPCPP2_IPV6) -D$(platform) $(WSDL2H_EXTRA_FLAGS) -DWITH_DOM -DWITH_COOKIES
-+libgsoapssl___la_LDFLAGS = -version-info $(SOVERSION)
-+libgsoapssl___la_LIBADD = -lssl -lcrypto -lz
-+
- BUILT_SOURCES = stdsoap2_cpp.cpp dom_cpp.cpp stdsoap2_ck.c stdsoap2_ck_cpp.cpp stdsoap2_ssl.c stdsoap2_ssl_cpp.cpp
- 
- include_HEADERS = stdsoap2.h
---- gsoap-2.8/gsoap/samples/autotest/Makefile.am
-+++ gsoap-2.8/gsoap/samples/autotest/Makefile.am
-@@ -14,7 +14,7 @@
- WSDLINPUT=$(top_srcdir)/gsoap/samples/autotest/examples.wsdl
- SOAPHEADER=$(top_srcdir)/gsoap/samples/autotest/examples.h
- SOAP_CPP_SRC=soapC.cpp soapServer.cpp
--SOAP_CPP_LIB=$(top_builddir)/gsoap/libgsoap++.a
-+SOAP_CPP_SHARED_LIB=$(top_builddir)/gsoap/libgsoap++.a
- 
- $(SOAP_CPP_SRC) : $(WSDLINPUT)
- 	$(WSDL) $(WSDL_FLAGS) $(WSDLINPUT)
-@@ -40,6 +40,6 @@
- autotest_CPPFLAGS=$(C_DEBUG_FLAGS) -D$(platform)
- autotest_CXXFLAGS=$(WSDL2H_EXTRA_FLAGS)
- autotest_SOURCES=$(SOAP_CPP_SRC) soapTester.cpp duration.cpp long_time.cpp struct_tm.cpp struct_tm_date.cpp
--autotest_LDADD=$(SOAP_CPP_LIB) $(SAMPLE_EXTRA_LIBS)
-+autotest_LDADD=$(SOAP_CPP_SHARED_LIB) $(SAMPLE_EXTRA_LIBS)
- 
- CLEANFILES= *~ *.h *.cpp *.xml *.log *.nsmap
---- gsoap-2.8/gsoap/samples/databinding/Makefile.am
-+++ gsoap-2.8/gsoap/samples/databinding/Makefile.am
-@@ -14,7 +14,7 @@
- WSDLINPUT=$(top_srcdir)/gsoap/samples/databinding/address.xsd
- SOAPHEADER=$(top_srcdir)/gsoap/samples/databinding/address.h
- SOAP_CPP_SRC=addressC.cpp
--SOAP_CPP_LIB=$(top_builddir)/gsoap/libgsoap++.a
-+SOAP_CPP_SHARED_LIB=$(top_builddir)/gsoap/libgsoap++.a
- 
- $(SOAP_CPP_SRC) : $(WSDLINPUT)
- 	$(WSDL) $(WSDL_FLAGS) $(WSDLINPUT)
-@@ -28,6 +28,6 @@
- address_CPPFLAGS=$(C_DEBUG_FLAGS) -D$(platform)
- address_CXXFLAGS=$(WSDL2H_EXTRA_FLAGS)
- address_SOURCES=$(SOAP_CPP_SRC) address.cpp
--address_LDADD=$(SOAP_CPP_LIB)
-+address_LDADD=$(SOAP_CPP_SHARED_LIB)
- 
- CLEANFILES= *~ address.h *C.cpp *H.h *Stub.h *.nsmap
---- gsoap-2.8/gsoap/wsdl/Makefile.am
-+++ gsoap-2.8/gsoap/wsdl/Makefile.am
-@@ -10,7 +10,7 @@
- AM_LDFLAGS=-L$(top_srcdir)/gsoap/wsdl -I$(top_srcdir)/gsoap -I$(top_srcdir)/gsoap/plugin
- AM_CPPFLAGS=-I$(top_srcdir)/gsoap -I$(top_srcdir)/gsoap/plugin
- SOAP=$(top_builddir)/gsoap/src/soapcpp2$(EXEEXT)
--SOAP_CPP_LIB=$(top_builddir)/gsoap/$(WSDL2H_SOAP_CPP_LIB)
-+SOAP_CPP_SHARED_LIB=$(top_builddir)/gsoap/$(WSDL2H_SOAP_CPP_SHARED_LIB)
- SOAP_CPP_SRC=wsdlC.cpp
- SOAPHEADER=$(top_srcdir)/gsoap/wsdl/wsdl.h
- SOAP_FLAGS=-SC -pwsdl -I$(top_srcdir)/gsoap/wsdl -I$(top_srcdir)/gsoap/import
-@@ -32,6 +32,6 @@
- if WITH_OPENSSL
- wsdl2h_SOURCES += $(top_srcdir)/gsoap/plugin/httpda.c $(top_srcdir)/gsoap/plugin/smdevp.c $(top_srcdir)/gsoap/plugin/threads.c
- endif
--wsdl2h_LDADD=$(SOAP_CPP_LIB) $(WSDL2H_EXTRA_LIBS)
-+wsdl2h_LDADD=$(SOAP_CPP_SHARED_LIB) $(WSDL2H_EXTRA_LIBS)
- 
- CLEANFILES= *~ *C.cpp *H.h *Stub.h *.nsmap

net-libs/gsoap/files/gsoap-2.8.93-fix-parallel-build.patch

---- a/gsoap/src/Makefile.am
-+++ b/gsoap/src/Makefile.am
-@@ -10,11 +10,13 @@ AUTOMAKE_OPTIONS = foreign 1.4
- AM_YFLAGS=-d -v
- AM_LFLAGS=$(LEX_FLAGS)
- 
-+BUILT_SOURCES = soapcpp2_yacc.h
-+
- bin_PROGRAMS=soapcpp2
- 
- soapcpp2_CFLAGS=$(BISON_DEFINE) $(LEX_DEFINE) $(C_DEBUG_FLAGS) $(SOAPCPP2_IMPORTPATH) -D$(platform)
- soapcpp2_LDADD=$(YACC_LIB) $(LEXLIB)
--soapcpp2_SOURCES= soapcpp2_yacc.y soapcpp2_yacc.h soapcpp2_lex.l symbol2.c error2.c init2.c soapcpp2.c
-+soapcpp2_SOURCES= soapcpp2_yacc.y soapcpp2_lex.l symbol2.c error2.c init2.c soapcpp2.c
- 
- CLEANFILES= *~ soapcpp2_lex.c soapcpp2_yacc.c soapcpp2_yacc.h soapcpp2_yacc.output
- 

net-mail/dbmail/Manifest

+AUX README.gentoo 1652 BLAKE2B beb9d27ac8de471d4ac8a3c4f626e7005d471477943b424b2603fe9ec92a6910bf0102c472e2d17dc1217d4bd6c286cd50da5d9b5fc6bd23c436cec8c0a84afd SHA512 0af8a295ce85260ca559f6491e8b7e318125b4f424639877a5744d0906023ccbd63c18b59f7fdb60da7994df9c3f62cef10a5db0ee940aa12c2382e33340f0a2
 AUX dbmail-3.2.3-fno-common.patch 310 BLAKE2B 1166b001939b200e43b2dd048413e55bd53c9c385f93b40e95ee8306d3386eb365ee30c7ba26c853cc81ca231fd4d4551886f6760697ed40e1cdefd5617ecef3 SHA512 32f2524fdf0e6bf59bc0138d2fb62edad00c6700740fc21281de29dd3b455136bde4072ccf5017425cd417c5408498b688ee453f53166aa80eccba20382d736d
-AUX dbmail-imapd.initd 1539 BLAKE2B a05e964172d58063b2fa4addb83c38bca5859e5a092b5672026a7c2641cc5edd63eb2c3b1cad2c8b7ba2ab15e7a7b812417fdec2e01531087b0a8a32bd929b62 SHA512 d7246dd7db8a6e85298cdcd191b525fcd76b3d7526f0c3ad084628651ce54d599fed3313693c8607c79d4ab79580a0bc30f6a0f9e5b814f30d5a4bd92719719d
-AUX dbmail-lmtpd.initd 1539 BLAKE2B 6864a82613a8ad4f0cd72322d1383086ebd9f17443ea6534c655e47ce4452cf013a150f3e137df432eb380fb0eb31f05ef0ad6a8c50a076020aefa0b49a9da58 SHA512 5497841698749158c78bf1ef365aabf642370a301bb74b334972ca95d85f16c508cd88d56a41c675f9ad448bc762b5134e09a408ca9d2f40d68abeb83b1ee7d8
-AUX dbmail-pop3d.initd 1539 BLAKE2B 9b74cb310b832bf3cd37bcbb6a25969221792d7694d711e98bfdcb0c9898ce8d68974bd9c221957c7915bc73dba89ac8887961af388c88d44ae1ce17337a0551 SHA512 5968a31db02d6e48adc5ec26527e2ce8fdd0abf78754b911bcb588fa3414598ef0b4dc2ef44220049b015aaa5b0efeaf2be2ff3171562ff82e46d36e2d32d59e
-AUX dbmail-timsieved.initd 1554 BLAKE2B b082e00fc491c768fda2afce07bc30c087a7bf927f8cb16e79d60609932fa09e1052acfd39526cb7fb256c5c44cbcdbe6ac94f59f3b12330fe6e51648fa2aae7 SHA512 2340916c1f6abb0ccfbc98f0cd91a042035c0ff6751bee944e6b9227c14bb829152f22763bc87244b6718e4c3df44de6892b1961923a54eef5724ba9befbc34b
+AUX dbmail-imapd.initd 867 BLAKE2B 4b9c20f1bc99f13b8c133eee63e78e213debb206bde0f35e361edfe9b6068d1e0c97aad95e1d1743caa554d22fb23f6ebb2fc15adfb093ea9947262cb90d2ba5 SHA512 40fb4197f54c9890884a8b15c56f9eb4ff4d74eca114d678abea156fe9bc404b0860b79da7f4e3cc5d26d0d96dcee91049c28698b5496a3d2e6b7d409bcc9cbd
+AUX dbmail-lmtpd.initd 867 BLAKE2B d8829e2b7856d0ccfe6e52aceae59a0811aac70759e4f5f9998e3ed714b235aa0ec3bfa775d3a01ee8b49336f6e20e5fb3eae675d8389fff1862db56f7ed8a0d SHA512 4ced920476580ecfa968c4b0a438b98063aa55a108c2b27b728e76d4c08b58ba5e3295256b5e66f16edd7d247acd2f8bf91262dd49c0a8058dd6132e0473c641
+AUX dbmail-pop3d.initd 867 BLAKE2B 2d24bbe482c28fab0884377bbd47fe7a859313d8c8b20a939692c12942e8dd313067a0304016c8293c5ccce876bbeb533e4bbacfe04f893959821791d7b4d6dd SHA512 e12d73d56fae8852a9926badcb00ae4d83a990d700741bc8ad238bfa302a9f58087efb6e59ee3925230fa001be3004f48fe61e7b17d09cad51a836edc7a15bb2
+AUX dbmail-timsieved.initd 930 BLAKE2B 4eb24e608540d994d75c8aea44aa8128e603fd9c64c4a8205c9581cc521e4a0ca75391796d4a9b369cdcbe74636cdaf55c00408c14b7cc9ec4ad4db307445909 SHA512 7f66fa4b77a638e803f1763809da66bd26f54b435f8e4cff3304d4b4e62d1510485c1af943046489a8c37b3b93a8b6cf4901feefa9f1f38dcdaa313211f19fa0
 DIST dbmail-3.2.3.tar.gz 2444227 BLAKE2B baa812fb3e925e6d896762596426208fc2ac5fcb01cb8100cfbd0464f1342f934c099ca52fd857e05fc82b97227155e9dcfc987d6c9b5c37e7daf21b167c9841 SHA512 29cc89830278f2ff28a4221fc81d4ff13cc371fbca7fb51d5376e9243234220b552cb4b6ec035c150e6cfa178435c4f36b9ce132fc02334bc6cdeb1a41c8ed85
+DIST dbmail-3.2.5.tar.gz 2463966 BLAKE2B f4099c6f869dbb041d7eccdf20f3a34d36918237cc0386c71a1d339da8651b9301e676b25201856038045bb9590f880353c6ccafd57330f9cf48382c1b4c603c SHA512 6b0d7e1f6f7449869db1e094ffce9e1ef315c60784ea5ae5f814f2cf9a18c358b4c5d107a420c7317961ffa343fc59c9083789177514aee96523927688f276a0
 EBUILD dbmail-3.2.3-r3.ebuild 4000 BLAKE2B c6a5d79374b0a017220f605affd06d37cc09818da99ac763d22cabdb61d4a4f0d8eee014f95fdc8b5680a3de1d7fc22b5f9439dedc7c3b1b446792d4a520c91a SHA512 38bb353cc721ae1a14d0fd9cbc48eb9d2b20798e9ffd52e8eb435e91910eb7cd741ae1497d60f936a11682e6f9c30f9b77f5a8c73b1d184e72e24a22f7db9cf6
+EBUILD dbmail-3.2.5.ebuild 2433 BLAKE2B 59669e7f0eea99372aa739588cbef61d13d336cbc158cfd16125d9cdd6d8d8f66e40967408eb26261d2a8219876282bf4c86b5a57306dcc3880890f7dc4cf273 SHA512 5c8da00d8301ff7135d706a972242b6e0c26f9eeb3c79c435a18ae713e3bbc01c6a781ea7ec823e667d0a4f9c9fea39bfbc6139e566fda0bede6771128abe251
 MISC metadata.xml 480 BLAKE2B 09dc565c0e3a53c0072229b6305cbcd4cf9d4927d6b7fba45cf27c772b2d78d96202d685a34d01eb6553c4a228975d8e3c4998c8ad8f7136e34229671b048248 SHA512 0acb11c787a286e0d8020f97d483102b57a323c80f6ed4c95d44a18d162856b3547db96fc92d1649061220cd8b009be44adfed2f7790cbe306662dd525f7a4ef

net-mail/dbmail/dbmail-3.2.5.ebuild

+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit systemd readme.gentoo-r1
+
+DESCRIPTION="Fast and scalable sql based email services"
+HOMEPAGE="https://www.dbmail.org/"
+SRC_URI="https://github.com/dbmail/dbmail/archive/v${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="+doc jemalloc ldap libressl sieve ssl static systemd"
+
+DEPEND="dev-db/libzdb
+	sieve? ( >=mail-filter/libsieve-2.2.1 )
+	ldap? ( >=net-nds/openldap-2.3.33 )
+	jemalloc? ( dev-libs/jemalloc )
+	app-text/asciidoc
+	app-text/xmlto
+	app-crypt/mhash
+	sys-libs/zlib
+	dev-libs/gmime:2.6
+	>=dev-libs/glib-2.16
+	dev-libs/libevent
+	ssl? (
+		!libressl? ( dev-libs/openssl:0= )
+		libressl? ( dev-libs/libressl:0= )
+	)"
+RDEPEND="${DEPEND}
+	acct-group/dbmail
+	acct-user/dbmail"
+DOCS=( AUTHORS README.md INSTALL THANKS UPGRADING )
+
+README_GENTOO_SUFFIX=""
+
+src_prepare() {
+	sed -i -e "s:nobody:dbmail: ; s:nogroup:dbmail: ; s:/var/run:/run/dbmail:" dbmail.conf || die
+	# change config path to our default and use the conf.d and init.d files from the contrib dir
+	sed -i -e "s:/etc/dbmail.conf:/etc/dbmail/dbmail.conf:" contrib/startup-scripts/gentoo/init.d-dbmail || die
+
+	default
+}
+
+src_configure() {
+	econf \
+		--enable-manpages \
+		--sysconfdir=/etc/dbmail \
+		$(use_enable doc manpages) \
+		$(use_enable static) \
+		$(use_enable systemd) \
+		$(use_with jemalloc) \
+		$(use_with sieve) \
+		$(use_with ldap auth-ldap)
+}
+
+src_install() {
+	emake DESTDIR="${D}" SYSTEMD_UNIT_DIR="$(systemd_get_systemunitdir)" install
+	einstalldocs
+
+	docompress -x /usr/share/doc/${PF}/sql
+	dodoc -r sql
+	dodoc -r test-scripts
+	dodoc -r contrib
+	## TODO: install other contrib stuff
+
+	insinto /etc/dbmail
+	newins dbmail.conf dbmail.conf.dist
+
+	# use custom init scripts until updated in upstream contrib
+	newinitd "${FILESDIR}/dbmail-imapd.initd" dbmail-imapd
+	newinitd "${FILESDIR}/dbmail-lmtpd.initd" dbmail-lmtpd
+	newinitd "${FILESDIR}/dbmail-pop3d.initd" dbmail-pop3d
+	newinitd "${FILESDIR}/dbmail-timsieved.initd" dbmail-timsieved
+
+	dobin contrib/mailbox2dbmail/mailbox2dbmail
+	doman contrib/mailbox2dbmail/mailbox2dbmail.1
+
+	# ldap schema
+	if use ldap; then
+		insinto /etc/openldap/schema
+		doins "${S}/dbmail.schema"
+	fi
+
+	keepdir /var/lib/dbmail
+	fperms 750 /var/lib/dbmail
+	fowners dbmail:dbmail /var/lib/dbmail
+	
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+}

net-mail/dbmail/files/README.gentoo

+Please read the INSTALL file in /usr/share/doc/${PF}/
+for remaining instructions on setting up dbmail users and 
+for finishing configuration to connect to your MTA and 
+to connect to your db.
+
+DBMail requires either SQLite, PostgreSQL or MySQL.
+Database schemes can be found in /usr/share/doc/${PF}/
+You will also want to follow the installation instructions
+on setting up the maintenance program to delete old messages.
+Don't forget to edit /etc/dbmail/dbmail.conf as well.
+
+For regular maintenance, add this to crontab:
+0 3 * * * /usr/bin/dbmail-util -cpdy >/dev/null 2>&1
+
+Please make sure to run etc-update.
+If you get an error message about plugins not found
+please add the library_directory configuration switch to
+dbmail.conf and set it to the correct path
+(usually /usr/lib/dbmail or /usr/lib64/dbmail on amd64)
+A sample can be found in dbmail.conf.dist after etc-update.
+
+We are now using the init script from upstream.
+Please edit /etc/conf.d/dbmail to set which services to start
+and delete /etc/init.d/dbmail-* when you are done. (don't
+forget to rc-update del dbmail-* first)
+
+Changed pid directory to /run/dbmail (see
+http://www.dbmail.org/mantis/view.php?id=949 for details)
+
+The database config has changed to support libzdb db URI
+Please check the documentation (or Bug #479664)
+
+The database schema has changed since 3.0.x make sure
+to run the migration script
+
+Please be aware, that the single init-script for all services
+has been replaced with seperate init scripts for the individual services.
+Make sure to add dbmail-(imapd|lmtpd|pop3d|timsieved) using rc-update
+and remove dbmail if you want to take advantage of this change.
+
+

net-mail/dbmail/files/dbmail-imapd.initd

-#!/sbin/openrc-run
+#!/sbin/runscript
 #
-# chkconfig: - 91 35
-# description: Starts and stops dbmail-impad
-#
-
-
-PROGRAM=dbmail-imapd
 
 BIN_DIR=/usr/sbin
 PID_DIR=/run/dbmail
@@ -18,51 +12,37 @@ CONFIG=/etc/dbmail/dbmail.conf
 #extra_started_commands="reload"
 
 depend() {
-        need net
-        # This won't cause a hard failure if neither is installed, however.
-        use mysql
-        use pgsql
-        after mta
+	need net
+	use mysql
+	use pgsql
+	after mta
 }
 
-initService() {
-    # Avoid using root's TMPDIR
-    unset TMPDIR
-
-    # Check that config file exists.
-    if [ ! -e $CONFIG ]; then
-        eerror "Config file not found ($CONFIG)"
-        eerror "An example config can be found in /etc/dbmail/dbmail.conf.dist"
-        return 1
-    fi
-
-    checkpath -d $PID_DIR -m 750 -o dbmail:dbmail
-
-    RETVAL=0
+checkconfig() {
+	if [ ! -e "/etc/dbmail/dbmail.conf" ]; then
+		eerror "You need to create apropriate config"
+		eerror "in /etc/dbmail/ . Example can be found in /etc/dbmail/dbmail.conf.dist"
+		return 1
+	fi
+	# Avoid using root's TMPDIR
+	unset TMPDIR
 }
 
+
 start() {
-	initService
-        ebegin "Starting DBMail IMAP daemon ($PROGRAM)"
-            start-stop-daemon --start --quiet \
-                --pidfile $PID_DIR/$PROGRAM.$PID \
-                --exec $BIN_DIR/$PROGRAM \
-                --name $PROGRAM \
-                -- -f $CONFIG -p $PID_DIR/$PROGRAM.$PID 2>&1
-        eend $?
-}
+	checkconfig && \
+	ebegin "Starting DBMail IMAP daemon"
+	    start-stop-daemon --start --quiet \
+		--exec /usr/sbin/dbmail-imapd \
+		--name dbmail-imapd \
+		-- -p ${PIDFILE} -f /etc/dbmail/dbmail.conf 2>&1
+	eend $?
+}	
 
 stop() {
-        ebegin "Stopping DBMail IMAP daemon ($PROGRAM)"
-            start-stop-daemon --stop --quiet --retry 15 \
-                --pidfile $PID_DIR/$PROGRAM.$PID
-        eend $?
-}
+	ebegin "Stopping DBMail IMAP daemon"
+	    start-stop-daemon --stop --quiet --retry 5 \
+		--pidfile ${PIDFILE}
+	eend $?
+}	
 
-## not in 3.1.x yet
-#reload() {#
-#       ebegin "Reloading DBMail IMAP daemon ($PROGRAM)"
-#           start-stop-daemon --quiet --signal HUP \
-#               --pidfile $PID_DIR/$PROGRAM.$PID
-#       eend $?
-#}

net-mail/dbmail/files/dbmail-lmtpd.initd

-#!/sbin/openrc-run
+#!/sbin/runscript
 #
-# chkconfig: - 91 35
-# description: Starts and stops dbmail-lmtpd
-#
-
-
-PROGRAM=dbmail-lmtpd
 
 BIN_DIR=/usr/sbin
 PID_DIR=/run/dbmail
@@ -18,51 +12,37 @@ CONFIG=/etc/dbmail/dbmail.conf
 #extra_started_commands="reload"
 
 depend() {
-        need net
-        # This won't cause a hard failure if neither is installed, however.
-        use mysql
-        use pgsql
-        after mta
+	need net
+	use mysql
+	use pgsql
+	after mta
 }
 
-initService() {
-    # Avoid using root's TMPDIR
-    unset TMPDIR
-
-    # Check that config file exists.
-    if [ ! -e $CONFIG ]; then
-        eerror "Config file not found ($CONFIG)"
-        eerror "An example config can be found in /etc/dbmail/dbmail.conf.dist"
-        return 1
-    fi
-
-    checkpath -d $PID_DIR -m 750 -o dbmail:dbmail
-
-    RETVAL=0
+checkconfig() {
+	if [ ! -e "/etc/dbmail/dbmail.conf" ]; then
+		eerror "You need to create apropriate config"
+		eerror "in /etc/dbmail/ . Example can be found in /etc/dbmail/dbmail.conf.dist"
+		return 1
+	fi
+	# Avoid using root's TMPDIR
+	unset TMPDIR
 }
 
+
 start() {
-	initService
-        ebegin "Starting DBMail LMTP daemon ($PROGRAM)"
-            start-stop-daemon --start --quiet \
-                --pidfile $PID_DIR/$PROGRAM.$PID \
-                --exec $BIN_DIR/$PROGRAM \
-                --name $PROGRAM \
-                -- -f $CONFIG -p $PID_DIR/$PROGRAM.$PID 2>&1
-        eend $?
-}
+	checkconfig && \
+	ebegin "Starting DBMail LMTP daemon"
+	    start-stop-daemon --start --quiet \
+		--exec /usr/sbin/dbmail-lmtpd \
+		--name dbmail-lmtpd \
+		-- -p ${PIDFILE} -f /etc/dbmail/dbmail.conf 2>&1
+	eend $?
+}	
 
 stop() {
-        ebegin "Stopping DBMail LMTP daemon ($PROGRAM)"
-            start-stop-daemon --stop --quiet --retry 15 \
-                --pidfile $PID_DIR/$PROGRAM.$PID
-        eend $?
-}
+	ebegin "Stopping DBMail LMTP daemon"
+	    start-stop-daemon --stop --quiet --retry 5 \
+		--pidfile ${PIDFILE}
+	eend $?
+}	
 
-## not in 3.1.x yet
-#reload() {#
-#       ebegin "Reloading DBMail LMTP daemon ($PROGRAM)"
-#           start-stop-daemon --quiet --signal HUP \
-#               --pidfile $PID_DIR/$PROGRAM.$PID
-#       eend $?
-#}

net-mail/dbmail/files/dbmail-pop3d.initd

-#!/sbin/openrc-run
+#!/sbin/runscript
 #
-# chkconfig: - 91 35
-# description: Starts and stops dbmail-pop3d
-#
-
-
-PROGRAM=dbmail-pop3d
 
 BIN_DIR=/usr/sbin
 PID_DIR=/run/dbmail
@@ -18,51 +12,37 @@ CONFIG=/etc/dbmail/dbmail.conf
 #extra_started_commands="reload"
 
 depend() {
-        need net
-        # This won't cause a hard failure if neither is installed, however.
-        use mysql
-        use pgsql
-        after mta
+	need net
+	use mysql
+	use pgsql
+	after mta
 }
 
-initService() {
-    # Avoid using root's TMPDIR
-    unset TMPDIR
-
-    # Check that config file exists.
-    if [ ! -e $CONFIG ]; then
-        eerror "Config file not found ($CONFIG)"
-        eerror "An example config can be found in /etc/dbmail/dbmail.conf.dist"
-        return 1
-    fi
-
-    checkpath -d $PID_DIR -m 750 -o dbmail:dbmail
-
-    RETVAL=0
+checkconfig() {
+	if [ ! -e "/etc/dbmail/dbmail.conf" ]; then
+		eerror "You need to create apropriate config"
+		eerror "in /etc/dbmail/ . Example can be found in /etc/dbmail/dbmail.conf.dist"
+		return 1
+	fi
+	# Avoid using root's TMPDIR
+	unset TMPDIR
 }
 
+
 start() {
-	initService
-        ebegin "Starting DBMail POP3 daemon ($PROGRAM)"
-            start-stop-daemon --start --quiet \
-                --pidfile $PID_DIR/$PROGRAM.$PID \
-                --exec $BIN_DIR/$PROGRAM \
-                --name $PROGRAM \
-                -- -f $CONFIG -p $PID_DIR/$PROGRAM.$PID 2>&1
-        eend $?
-}
+	checkconfig && \
+	ebegin "Starting DBMail POP3 daemon"
+	    start-stop-daemon --start --quiet \
+		--exec /usr/sbin/dbmail-pop3d \
+		--name dbmail-pop3d \
+		-- -p ${PIDFILE} -f /etc/dbmail/dbmail.conf 2>&1
+	eend $?
+}	
 
 stop() {
-        ebegin "Stopping DBMail POP3 daemon ($PROGRAM)"
-            start-stop-daemon --stop --quiet --retry 15 \
-                --pidfile $PID_DIR/$PROGRAM.$PID
-        eend $?
-}
+	ebegin "Stopping DBMail POP3 daemon"
+	    start-stop-daemon --stop --quiet --retry 5 \
+		--pidfile ${PIDFILE}
+	eend $?
+}	
 
-## not in 3.1.x yet
-#reload() {#
-#       ebegin "Reloading DBMail POP3 daemon ($PROGRAM)"
-#           start-stop-daemon --quiet --signal HUP \
-#               --pidfile $PID_DIR/$PROGRAM.$PID
-#       eend $?
-#}

net-mail/dbmail/files/dbmail-timsieved.initd

-#!/sbin/openrc-run
+#!/sbin/runscript
 #
 # chkconfig: - 91 35
 # description: Starts and stops dbmail-timsieved
 #
 
-
 PROGRAM=dbmail-timsieved
 
 BIN_DIR=/usr/sbin
@@ -14,55 +13,39 @@ PID=pid
 # Where is the dbmail.conf file located?
 CONFIG=/etc/dbmail/dbmail.conf
 
-## not in 3.1.x yet
-#extra_started_commands="reload"
+PIDFILE="/run/dbmail-timsieved.pid"
 
 depend() {
-        need net
-        # This won't cause a hard failure if neither is installed, however.
-        use mysql
-        use pgsql
-        after mta
+	need net
+	use mysql
+	use pgsql
+	after mta
 }
 
-initService() {
-    # Avoid using root's TMPDIR
-    unset TMPDIR
-    
-    # Check that config file exists.
-    if [ ! -e $CONFIG ]; then
-        eerror "Config file not found ($CONFIG)"
-        eerror "An example config can be found in /etc/dbmail/dbmail.conf.dist"
-        return 1
-    fi
-
-    checkpath -d $PID_DIR -m 750 -o dbmail:dbmail
-
-    RETVAL=0
+checkconfig() {
+	if [ ! -e "/etc/dbmail/dbmail.conf" ]; then
+		eerror "You need to create apropriate config"
+		eerror "in /etc/dbmail/ . Example can be found in /etc/dbmail/dbmail.conf.dist"
+		return 1
+	fi
+	# Avoid using root's TMPDIR
+	unset TMPDIR
 }
 
+
 start() {
-	initService
-        ebegin "Starting DBMail SIEVE daemon ($PROGRAM)"
-            start-stop-daemon --start --quiet \
-                --pidfile $PID_DIR/$PROGRAM.$PID \
-                --exec $BIN_DIR/$PROGRAM \
-                --name $PROGRAM \
-                -- -f $CONFIG -p $PID_DIR/$PROGRAM.$PID 2>&1
-        eend $?
-}
+	checkconfig && \
+	ebegin "Starting DBMail SIEVE daemon"
+	    start-stop-daemon --start --quiet \
+		--exec /usr/sbin/dbmail-timsieved \
+		-- -p ${PIDFILE} -f /etc/dbmail/dbmail.conf 2>&1
+	eend $?
+}	
 
 stop() {
-        ebegin "Stopping DBMail SIEVE daemon ($PROGRAM)"
-            start-stop-daemon --stop --quiet --retry 15 \
-                --pidfile $PID_DIR/$PROGRAM.$PID
-        eend $?
-}
+	ebegin "Stopping DBMail SIEVE daemon"
+	    start-stop-daemon --stop --quiet --retry 5 \
+		--pidfile ${PIDFILE}
+	eend $?
+}	
 
-## not in 3.1.x yet
-#reload() {#
-#       ebegin "Reloading DBMail SIEVE daemon ($PROGRAM)"
-#           start-stop-daemon --quiet --signal HUP \
-#               --pidfile $PID_DIR/$PROGRAM.$PID
-#       eend $?
-#}

net-misc/dropbox/Manifest

@@ -3,8 +3,11 @@ AUX dropbox.initd 1581 BLAKE2B c23a753b7e4d1132d516d607e0eee35072130f6e66c59af00
 AUX dropbox_at.service-r2 1582 BLAKE2B 7a5d8eb1e99d6a9f6cc7d903d8d2cb6b124b4a5217e978d05f0afb08de90b3634bb802bd075a053b84b0ec4f5ef6643d2efb00beb964f9f14dd3dd234806358b SHA512 ce465614c848103ac19d3782bf55508ab9b3a3f1c0159cd0ccb7daa7374f014382b30a99bf2eb5488ab4474cad953ce0b4710c8222e5196ea49672db5d183b85
 DIST dropbox-lnx.x86-112.4.321.tar.gz 99004752 BLAKE2B adec5e29703d36ceadcaed1447b03d5edfd2249f06ab295c55c87684bf4b4c9c59a49a59b71158c17908753cb4dac51e17629cc2fb07c4b44d32d094cecae8e5 SHA512 222cb754713233b05fcf918995ca21d5b5663757304d1303534007872ea83e432641fa13b758b21dcd24568b63fd88b3fed1e45d15b0422226040e655796d369
 DIST dropbox-lnx.x86-113.4.507.tar.gz 100113763 BLAKE2B 6340195b5d6d47b077e4a7b335c4c1d3298d6504503fb39bc71e407d7e8e09cd80afaed9df84dd4e7ea875a8adf28279d9d348f54905958034152fd201b4e4cf SHA512 4e74df30a7debd5c8e2aca4a2494178392d6646bc7dd1966a3aa730b43f0759251a046a7e9266ce68f683786ef9998e71718be1769c574019d688b6420f7ee17
+DIST dropbox-lnx.x86-114.4.426.tar.gz 100421824 BLAKE2B 1070be0d3607c8f3df0277dcae282bce704578d9c02fd191f32503dc1f152e6861b3945d19b186eda23ac8676b8e7da31050bc954a25e1b33fb4a4098d22f48c SHA512 d64ecd9889ab46c50ee6e2d7978afca3fa34fe3093f68ce2b328e488bb536a61a54c9c835be32765200e382dbaab3d8c025cf185998371793fb202c0998ab5f2
 DIST dropbox-lnx.x86_64-112.4.321.tar.gz 103084021 BLAKE2B 96c15e627434557663712bd6f679efd11b8a6e353757becf1a09830e6f16fb5652159af9601ae1ca84ec397aee277161bcaf1988589b782c43ec433b7ed69a66 SHA512 e22c5595ba5dc90e3fcc958be92ac5fb403f76d8567a03bcfb14e5ea058147f23564de6a2d020a37da4f5a0c34dc85ccbc528bf1f1c683b370899e22f6e652ab
 DIST dropbox-lnx.x86_64-113.4.507.tar.gz 103671827 BLAKE2B 32bab397f2a964c63a733bdd5834cae5a872346fd56f539ce55df91755e8d4c9195e77723ca9d345fea5769163d15cd19406d28c9d4ff76b61d45ec77d729b78 SHA512 473282044032bab21e0d24c6987343b1cfdad98a4f608336d6c6af50e613e201ed71d56e5d231252e2eb3df236cdbba7c74ef1b6378fa88b1bce5995113d660d
+DIST dropbox-lnx.x86_64-114.4.426.tar.gz 104003045 BLAKE2B f71e9aba191f7258588aeb2cf2459eb0d9311c5c56e711f9b2932b8dfe2070cc0f1a20d3cfc9fc710ad75093e18fa494f9a42a6ff23d3e231e76edd29146612a SHA512 c9d42944e81fdb1ad315c388acdfba4b3da53bf90b6265c8ca030152c39ac0a60e8d064b1c47df7d8ecaca8b0801ad0851a2252d2241580cfc479cbf76e9fc3b
 EBUILD dropbox-112.4.321.ebuild 2617 BLAKE2B 4c3c0dff5562ba9d40f10b6b5754a5f4ee8011bc7331a0ad9e2d89997a22e00752c8a062a24a4c49404fd6b2743f814b31e792c25ecbeecd0340a4edf33ddebb SHA512 3a89190dd79b8eb50e33262c3a76fd63476c09c42cdb7026abb72e4fd1eb109c92f0f6c09903af4874cb72c271998ceb21723a6f893fb954eade67c1be860765
 EBUILD dropbox-113.4.507.ebuild 2619 BLAKE2B d06e213989e8f510e35428371d832f5a8b3828843ae8c932e563130fa79964a8e2a56d4ddab37d978e08579819f578aeffa94fa9700cdc12191b53699903e2ab SHA512 00717249a02ad1415ca9ae63dfed9d062474148800fe343a9b78f7156353b51403862cd52207222cefc9a67021c8c15509aac2d2bba9ea00de11f22bee0e885d
+EBUILD dropbox-114.4.426.ebuild 2619 BLAKE2B d06e213989e8f510e35428371d832f5a8b3828843ae8c932e563130fa79964a8e2a56d4ddab37d978e08579819f578aeffa94fa9700cdc12191b53699903e2ab SHA512 00717249a02ad1415ca9ae63dfed9d062474148800fe343a9b78f7156353b51403862cd52207222cefc9a67021c8c15509aac2d2bba9ea00de11f22bee0e885d
 MISC metadata.xml 335 BLAKE2B 6b61d3baf32526555421f8507defe48e5dff38e51a27fdbe7a3006a1083f2334b5ea83d4d4d9cf87b45af211a267a31e8bec805a1db1766087090455268fe724 SHA512 ee923a78e49b35d74453bdf51ce5be59f695f5aaf54f7ff58eb2d3165dc9acf97371110f92456a5a39d862a5ebe967c3225489ba407c6ea1250443868255613a

net-misc/dropbox/dropbox-114.4.426.ebuild

+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit desktop pax-utils systemd xdg
+
+DESCRIPTION="Dropbox daemon (pretends to be GUI-less)"
+HOMEPAGE="https://www.dropbox.com/"
+SRC_URI="
+	amd64? ( https://clientupdates.dropboxstatic.com/dbx-releng/client/dropbox-lnx.x86_64-${PV}.tar.gz )
+	x86? ( https://clientupdates.dropboxstatic.com/dbx-releng/client/dropbox-lnx.x86-${PV}.tar.gz )"
+
+LICENSE="BSD-2 CC-BY-ND-3.0 FTL MIT LGPL-2 openssl dropbox"
+SLOT="0"
+KEYWORDS="~amd64 ~x86 ~x86-linux"
+IUSE="selinux X"
+
+RESTRICT="mirror strip"
+
+QA_PREBUILT="opt/.*"
+QA_EXECSTACK="opt/dropbox/dropbox"
+
+BDEPEND="dev-util/patchelf"
+
+# Be sure to have GLIBCXX_3.4.9, #393125
+RDEPEND="
+	X? (
+		x11-themes/hicolor-icon-theme
+	)
+	selinux? ( sec-policy/selinux-dropbox )
+	app-arch/bzip2
+	dev-libs/glib:2
+	dev-libs/libffi-compat:6
+	media-libs/fontconfig
+	media-libs/freetype
+	net-misc/wget
+	sys-libs/zlib
+	sys-libs/ncurses-compat:5
+	virtual/opengl
+	x11-libs/libICE
+	x11-libs/libSM
+	x11-libs/libX11
+"
+
+src_unpack() {
+	unpack ${A}
+	mkdir -p "${S}" || die
+	mv "${WORKDIR}"/.dropbox-dist/* "${S}" || die
+	mv "${S}"/dropbox-lnx.*-${PV}/* "${S}" || die
+	rmdir "${S}"/dropbox-lnx.*-${PV}/ || die
+	rmdir .dropbox-dist || die
+}
+
+src_prepare() {
+	default
+	# we supply all of these in RDEPEND
+	rm -vf libGL.so.1 libX11* libffi.so.6 || die
+	# some of these do not appear to be used
+	rm -vf libQt5{OpenGL,PrintSupport,Qml,Quick,Sql,WebKit,WebKitWidgets}.so.5 \
+		PyQt5.QtPrintSupport.* PyQt5.QtQml.* PyQt5.QtQuick.*  \
+		wmctrl libdrm.so.2 libpopt.so.0 || die
+	if use X ; then
+		mv images/hicolor/16x16/status "${T}" || die
+	else
+		rm -vrf images || die
+	fi
+	patchelf --set-rpath '$ORIGIN' \
+		apex._apex.*.so \
+		nucleus_python.*.so \
+		tprt.*.so \
+		|| die
+	pax-mark cm dropbox
+	mv README ACKNOWLEDGEMENTS "${T}" || die
+}
+
+src_install() {
+	local targetdir="/opt/dropbox"
+
+	insinto "${targetdir}"
+	doins -r *
+	fperms a+x "${targetdir}"/{dropbox,dropboxd}
+	dosym "${targetdir}/dropboxd" "/opt/bin/dropbox"
+
+	use X && doicon -s 16 -c status "${T}"/status
+
+	make_desktop_entry "${PN}" "Dropbox" "dropboxstatus-logo"
+
+	newinitd "${FILESDIR}"/dropbox.initd dropbox
+	newconfd "${FILESDIR}"/dropbox.conf dropbox
+	systemd_newunit "${FILESDIR}"/dropbox_at.service-r2 "dropbox@.service"
+
+	dodoc "${T}"/{README,ACKNOWLEDGEMENTS}
+}
+
+pkg_postinst() {
+	einfo "Warning: while running, dropbox may attempt to autoupdate itself in"
+	einfo " your user's home directory.  To prevent this, run the following as"
+	einfo " each user who will run dropbox:"
+	einfo ""
+	einfo "install -dm0 ~/.dropbox-dist"
+}

net-misc/socat/Manifest

 AUX socat-1.7.3.0-filan-build.patch 1164 BLAKE2B ea158041a421fdfbbcfb14f050920f9f6ea9d99097d74c9c81c63c5816595f2ef8475b3add04d9efd8d19498382520a4f686d73c85b1df1879d5997b2f4da635 SHA512 479a189bbc0546e8838f40e770902c0c82d5fd042e1d94731d0036f66448810dd5ffcd5297b3ad4e474db8e037d211e65648a5f35f41827d7a320d6b2b8208bf
 AUX socat-1.7.3.1-stddef_h.patch 1272 BLAKE2B 1693a96be8fc27c102ef48fd16a1c719ff240b7330800ee26876f2b9a0b21671d79da3244f87894ee2f65ca833f34e9636ed7ace4f19951fa4443abe26a2bb9c SHA512 294acc9f05526eb47bc2cc01603b1c5bc553c4a2ffaaf63b87b66eb653930c0f8139fb8c4d72ddec10482e35ae3a6ba144a6555c8ba64066c30cc4132f10f2bf
 AUX socat-1.7.3.4-fno-common.patch 497 BLAKE2B b1329f43afd86989d527a292ec188ebacfd269efe68bb649c6652cc7eb49d43363b0e0925c40cfa2e52a318a7eb84ae4822db98a5cbed69b394481f168def9ca SHA512 0dd7c92f8da42e99409b086ba48e757aa0fcdc404b771ce6d8f43296c72ab939bb98c202056312df5424332f9209b4f2b32b212b90c9d5819fb98ab0d890bc24
-AUX socat-1.7.4.0-32bit_build_fix.patch 1221 BLAKE2B f62b549c4ecce4df792c2ada29f251f0fdd142f593637abe962d42a9bb6af65bfac94e47846a612b97ee639c69addfdfc2de09a8bc4d2b062da2610b0e89f88d SHA512 734e74acfafbd3b1eadd71177198e9ee4f841f43c0da23f546026f56ae9649b99f04636361c46f5399e222a3e397ce02e635043b13c301e216426d98e4aa7131
 AUX socat-2.0.0_beta9-libressl.patch 9738 BLAKE2B c790d2e6486ace62f410680d93679177dacdda1dc03700711163bf66d73bd728ccc3c0e4ad45c7a8c65eaf47239c7558044e0683a80fdf75eab51e09df36ee63 SHA512 183972f5354872557a6ad131f1c8276b0250729aaa6659cd202dcf534d8b4bc41dd19cc6525bc888c325c670922ba382c684103ecdd8a385e5d27f52f321c7ed
 DIST socat-1.7.3.4.tar.bz2 490552 BLAKE2B 68db1674a3156b28c10340e515f346de83d4e953570f3a3cdee9402db9f276285a8f46db14978b4651df6d0fa90fb496696f151afb3e826172daa444ee35e666 SHA512 f338d28e5fd9d7ebb9e30b0fa700bcd5ff50ff9e668403474963a3310ba2b5f68b5236b928872c18e4b1ee95328374987e7e263ac7655a0d9b3fc9da77281123
-DIST socat-1.7.4.0.tar.bz2 509023 BLAKE2B 97ad5f5a52375aea4d2afbb4ac6143a86bfa057aed602d552b015f6c9fc6a3a0cc65b1717573b3c60bed482da908197366bd1d282ee1db6fd86a229484d2bb9f SHA512 c4d166c2259271a70f81d6c4972549549c3fc60a9e47cc03eff1dd4d71c298ac39c177ae3c053dc0c97c2770fe8d157fd0bc6f2c14aef91625f868894d5d7c61
 DIST socat-1.7.4.1.tar.bz2 510101 BLAKE2B 9b7ca0a0add173c39d736d470079bf8e1330a8b11497128cc2b5edb019277682697f1f71f6d3d4a526a74a7297e4aace25493acea98ea95a885c52e5a9c34568 SHA512 7fa069bff294a01baebfd790faed027391ab1f47f09f0990e6dcb1c7cce5f3cdc20638fecb10e82c10b6342d903de9481f6d85a0debcc0368c882417dafbc756
 DIST socat-2.0.0-b9.tar.bz2 516673 BLAKE2B 808c8821b89ae2463074f87915dfae10f82b66ac6cd0b6ff56ab18f57c704e5a2a3ce76650152dccce41e4bd00e3a937948d4ade0a915b1f0e917c7543c6fc31 SHA512 f728bd634feeeacd2f0e4020c1c6aafdadaef3ba9da818d9ae1195e9f48fb693b2bea8dbbb208af8daddd8d6405217113d5ce31d05c2e9b27f5d2fba6b1cc834
 EBUILD socat-1.7.3.4.ebuild 1586 BLAKE2B 7dfdd2075cee949d3252488fb60a5d3370bf540463857521a06b5e3fc32ae75195a4383e8dc18673322ef3db9ab2f25209ac638e67e7ad65bc113a3d4285b50b SHA512 716db6a19271e18a9f08386ef2906f55d7c483186e3622fca19075b2fbcbb57c3f22fc7adf62398528b576afff040aa6bef3dbf6d6ccd9f0fc919dc1f9faaa07
-EBUILD socat-1.7.4.0.ebuild 1589 BLAKE2B 0be8375683d1948e56b7454ccd73c285d4871eb747b7c5efb21cd4f34717252ba55c0c1a2df485fa0a4374f098f826a4a7d2db6c551f282f9bc5994657edc547 SHA512 b5fc6b3535db3b43912832b976aace63fde55c7360da0f93fdad14c51d0084a9bd000c1c9a3bebecf48fcf77f99841ffe279dc51aa1971bceb341ca1ae2fe6c4
 EBUILD socat-1.7.4.1.ebuild 1534 BLAKE2B 1ab55137a27da5a25d6cb8d3ebf72f7b52aa0161a8ade16892fd68d0c6e40922996228050d51d72ce8e13f712574aa85249a550e9e6b3b65eb7e606e6d12a970 SHA512 3e3a47d3e41a8dfa9dda7c625d33d04f34c1a22695ff866db5dcf2234d9e8725a4ce80d241032a991df65d2086a204a660c8695ec1130f3cf245a32a58720fe8
 EBUILD socat-2.0.0_beta9.ebuild 1684 BLAKE2B 8b12d6c8f85d1f3d161238100f994c1f85862b1abc0d5759eca22d5e743821d1cccd2e1f505b19faf8ad4d65803fe26fd1a388b8a21802f000ec94d9f145a360 SHA512 5c3c58e869b297dfffded35ff69b6f34574901472196863bd8f29d52e4957129923c2f0738dc0a0b64c6cebbcb421be20ff008561ab53bfc91f543a0f96726d1
 EBUILD socat-9999.ebuild 1406 BLAKE2B c68fd7bf03d58f1bd16266304afab4cc73e2e129be5facb7416ed0a765fd198b02a76e5459b4dda831e2c4765c6cd9d4e0669dd024795161f38909c62d882116 SHA512 6ab7b9aa353e917b8aa46f2179bbcff95fa03e1e59ff4a8f68c512cbc8a582d5e288bd79a2a251c47837b60318640a1005392e0ebc72844a08327e41effdcc18

net-misc/socat/files/socat-1.7.4.0-32bit_build_fix.patch

-2021-01-08: Quick fix to a compilation failure especially on 32 bit systems
-
---- socat-1.7.4.0/compat.h
-+++ socat-1.7.4.0/compat.h
-@@ -134,6 +134,8 @@
- #    define F_uint64_t "%u"
- #  elif HAVE_BASIC_UINT64_T==6
- #    define F_uint64_t "%lu"
-+#  elif HAVE_BASIC_UINT64_T==8
-+#    define F_uint64_t "%llu"
- #  else
- #    error "HAVE_BASIC_UINT64_T is out of range:" HAVE_BASIC_UINT64_T
- #  endif
-@@ -147,7 +149,7 @@
- #  elif HAVE_BASIC_INT16_T==3
- #    define F_int16_t "%d"
- #  elif HAVE_BASIC_INT16_T==5
--#    define F_int16_t "%l"
-+#    define F_int16_t "%ld"
- #  else
- #    error "HAVE_BASIC_INT16_T is out of range:" HAVE_BASIC_INT16_T
- #  endif
-@@ -161,7 +163,7 @@
- #  elif HAVE_BASIC_INT32_T==3
- #    define F_int32_t "%d"
- #  elif HAVE_BASIC_INT32_T==5
--#    define F_int32_t "%l"
-+#    define F_int32_t "%ld"
- #  else
- #    error "HAVE_BASIC_INT32_T is out of range:" HAVE_BASIC_INT32_T
- #  endif
-@@ -175,7 +177,9 @@
- #  elif HAVE_BASIC_INT64_T==3
- #    define F_int64_t "%d"
- #  elif HAVE_BASIC_INT64_T==5
--#    define F_int64_t "%l"
-+#    define F_int64_t "%ld"
-+#  elif HAVE_BASIC_INT64_T==7
-+#    define F_int64_t "%lld"
- #  else
- #    error "HAVE_BASIC_INT64_T is out of range:" HAVE_BASIC_INT64_T
- #  endif

net-misc/socat/socat-1.7.4.0.ebuild

-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit flag-o-matic toolchain-funcs
-
-MY_P=${P/_beta/-b}
-DESCRIPTION="Multipurpose relay (SOcket CAT)"
-HOMEPAGE="http://www.dest-unreach.org/socat/ https://repo.or.cz/socat.git"
-SRC_URI="http://www.dest-unreach.org/socat/download/${MY_P}.tar.bz2"
-S="${WORKDIR}/${MY_P}"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos"
-IUSE="bindist libressl ssl readline ipv6 tcpd"
-
-DEPEND="
-	ssl? (
-		!libressl? ( dev-libs/openssl:0= )
-		libressl? ( dev-libs/libressl:= )
-	)
-	readline? ( sys-libs/readline:= )
-	tcpd? ( sys-apps/tcp-wrappers )
-"
-RDEPEND="${DEPEND}"
-
-# Tests are a large bash script
-# Hard to disable individual tests needing network or privileges
-RESTRICT="
-	test
-	ssl? ( readline? ( bindist ) )
-"
-
-DOCS=( BUGREPORTS CHANGES DEVELOPMENT EXAMPLES FAQ FILES PORTING README SECURITY )
-
-PATCHES=(
-	"${FILESDIR}/${P}-32bit_build_fix.patch"
-)
-
-pkg_setup() {
-	# bug #587740
-	if use readline && use ssl; then
-		elog "You are enabling both readline and openssl USE flags, the licenses"
-		elog "for these packages conflict. You may not be able to legally"
-		elog "redistribute the resulting binary."
-	fi
-}
-
-src_configure() {
-	filter-flags '-Wno-error*' #293324
-	tc-export AR
-
-	econf \
-		$(use_enable ssl openssl) \
-		$(use_enable readline) \
-		$(use_enable ipv6 ip6) \
-		$(use_enable tcpd libwrap)
-}
-
-src_install() {
-	default
-
-	docinto html
-	dodoc doc/*.html doc/*.css
-}

net-misc/suite3270/Manifest

@@ -2,5 +2,5 @@ AUX suite3270-3.5_p8-tinfo.patch 2733 BLAKE2B ea2d966d5138e33289d803223a4e49f4dc
 DIST suite3270-3.6ga8-src.tgz 3296047 BLAKE2B 98bcee4591c3eea12c7127aa2eeb39613f6f090c041ceab7a7b0f1bf0e946c3048ba2f93eaacf2bbaf04b44ba78a8895f6b7acdcf20baea19a408464f83f4d62 SHA512 88a00bec19ae7be92e5bc0edd6ae1e27bef7fbbf8c3f419efda3ba2b3a0cb5e72693916cd44d50166d5745ce0f9d8497641481cedbb0bb3149567b6f51b1a987
 DIST suite3270-4.0ga13-src.tgz 3317494 BLAKE2B 898f279143006e1fc1f470bda3917afe85957de745676dc915f9c94292824ba0e10fc2ccf0a47e307c41e48741a3da7c066c45f63c917295e0522122226b79dd SHA512 bdf9c5d129419c87b45907186e5f158d8623009151357e4d8a3d08ffff2f3729449cead84d005227bfb32968ae363d1a29350692cabe9bf8b71f760eda3f496b
 EBUILD suite3270-3.6_p8.ebuild 2126 BLAKE2B 6af9b8a731e933740f3ebf1f260251d7c91806f32bc70f3bf26a914227c7ef7bd9592fb898f1a8e2fbb7eeed0c703cfbd82a2bdbe0973512007f674fc2b8b908 SHA512 6d834fc4455625b414b2b19b509b71dc6a19501ff301fe15acb49c0e0fb632ef5d3ffac10e72e7ea593c00541c4bf0010a526d9c14c6e9ca077d76ef09672a33
-EBUILD suite3270-4.0_p13.ebuild 2051 BLAKE2B ae0b505194c0a131221e9e9fdfa1bf85ad2cc7027cd836c5c95e638c95642694e6e8cd39d07480db89cab02f23f41aa7453bce80a0d8bc9f96f44cc99962d0b0 SHA512 60dbb971b2a98b10104fb0c69e02fd7eb42d2f148c675edda54ab62850f3912afb018cb023209f3621bc2fd7146247a36a85249a5a6935459605153c14610404
+EBUILD suite3270-4.0_p13.ebuild 2050 BLAKE2B 1b13c840e1ffc5406b1d224b97fc3d74b115711ef35b3c42bcaaffdb7c775a29cd71b7d5f7d934ebb561e58d5bd90eabf19da02a42c28aa3ac6c24896cd6be00 SHA512 1266e05743fc2e83944bec4e3de9bc5e70e14453a7c29064ba36700187e30c05114880460264c5e0a43f7822b4bc0d4c091d8a2d67ecfefbc7fec3c06b329da8
 MISC metadata.xml 463 BLAKE2B 5035d30c690419dbe52b4caf68981eb40c858f09787189439dda81dd57096276a029201b0ea3eb67840a14552d9c4dcf21eb00003ea530b79b85219cc607c19b SHA512 ef297d66d1c0b2c7ab6f8d0c489f355267124cd1f0cc09d18cf1b2cd33458be4c8e1716e84753ba6e49903a90fb676fb7ae908205672f927656ebd9c11879e45

net-misc/suite3270/suite3270-4.0_p13.ebuild

@@ -21,7 +21,7 @@ SRC_URI="mirror://sourceforge/x3270/${MY_P}-src.tgz"
 
 LICENSE="GPL-2"
 SLOT="0"
-KEYWORDS="~amd64 ~ppc s390 ~sparc ~x86"
+KEYWORDS="~amd64 ~ppc s390 sparc ~x86"
 IUSE="cjk doc ncurses ssl tcl X"
 
 RDEPEND="ssl? ( dev-libs/openssl:0= )

net-wireless/unifi/Manifest

@@ -5,6 +5,6 @@ DIST unifi-6.0.43.zip 136844666 BLAKE2B fb330f9ba8c2d22dacd5e37fbeccc411101e3885
 DIST unifi-6.0.45.zip 147691229 BLAKE2B ad8e34e4934449151b0244bb32e2ce81e2506f228c995e72c2756279ce22f1ce06d44c37f1cfd6156cee0d03066e36d99f98b56d2a1c759ee98ada6569b8309e SHA512 6b2aebf33b6e2114a2b274ce332e2bd88a30406e3a21bc66dc0eddee3ee27ee2e4d3948dea73ff85289cbc2ed0e4f2b646e095091c54120f718b5fb2f0b35943
 DIST unifi-6.1.26.zip 243498936 BLAKE2B 72a17f02279ecedd8f876df85167824a03abebb2816e68fcbfff11923b00c1e0b80b7357e48a4e044f0835e3e0054bd0ab034bd8fb3d67289bf61b4804ce9a87 SHA512 9ea5a7307ad507f08e4d39805bdf776eaa50895513e4c086d94527e28ae93b1f97e3d1b23ff314ed03ea560638b8cb44fc16bf4ff8f7746035e8b5de9b31321b
 EBUILD unifi-6.0.43.ebuild 1565 BLAKE2B 8b55f4c16cd19b6e34d86c8efae53bff61d80c55e2dc351927d6f5860e6e0db8ebcfd02cf1aff2c1c5998f41da165a53f6e71ba184d705fa6c178c62140726ae SHA512 1fc10fb07c246c9d5b7f6d22dca402c6a79af60c6f450b4ada3b724855092a5eb9af94a1077a2e64cd4d3623ada7d1ba26fff131e04bdfa834e6b6e8c70f331a
-EBUILD unifi-6.0.45.ebuild 1566 BLAKE2B 78fdc586ca4dc56b204d218981d799d1bd20d92fe0fce962f599a0386a3f7d07ced8fe5a59c5bd92eb1e3a7ab4269475e407dfd9aa77312c1ef51e7d09496a2c SHA512 92e0497fa98342ba67bd7bc43c2cb00ee579000589b64768c46ebe533dc92096b43a3c447725b12a12e4fe72a821d46e592b1095be56be505204659dec9aa48a
+EBUILD unifi-6.0.45.ebuild 1565 BLAKE2B 2750bd1a561a8e7bd0287ef38ec7b6fa8a799dcec219493388c009da1d4c2def69d765a86514ff13f647d8148ff060106382030b039755a43dcc69dab38d3f2c SHA512 6c0526d1b855a49aa2a81f6d91d0a514e54c7332012cc114302c5b73956ac7855ce006b08fbcf2c650c9a05910b145e6068bd4562685408e6032ffa71ed6f624
 EBUILD unifi-6.1.26.ebuild 1566 BLAKE2B 1e7c0b6b4dffc76041f23daa3d6523a7e4b088f4cf3be529bf1acc7bf48c94049d51e351c425bf6a488bb253708bcb62983c2918364ac8f0792231e67c486023 SHA512 f1b22181098927c83c0cefd7359c112ea38f1b4c096edbb4eaee97cbc0ef56261292ddc19e5208319bdfa85908d5203dfaf91f4dc9b893052fc6047f6ff73a9a
 MISC metadata.xml 683 BLAKE2B 830f1b290d1836708aebdb1200caed6120df7ca573173584cfac59ec7eb3e8e38be65e237535d722f215ebb69b8739cf900fb79cddb78e60a09d1cbb1ff222f9 SHA512 da328bd64dea83da1f7f2bfe3431701597cc6a9829b0e0a5ec82bb4167f2f57b144b9d9c77656da33dc9b59e0d53ac89e18be6f776ac4356151d331f020c4ae0

net-wireless/unifi/unifi-6.0.45.ebuild

@@ -12,7 +12,7 @@ DESCRIPTION="A Management Controller for Ubiquiti Networks UniFi APs"
 HOMEPAGE="https://www.ubnt.com"
 SRC_URI="https://dl.ui.com/unifi/${PV}${RC_SUFFIX}/UniFi.unix.zip -> ${P}.zip"
 
-KEYWORDS="~amd64"
+KEYWORDS="amd64"
 LICENSE="Apache-1.0 Apache-2.0 BSD-1 BSD-2 BSD CDDL EPL-1.0 GPL-2 LGPL-2.1 LGPL-3 MIT ubiquiti"
 SLOT="0/6.0"
 IUSE="systemd"

profiles/arch/sparc/package.use.mask

@@ -6,13 +6,6 @@
 # bug #766186
 dev-util/ragel doc
 
-# Sam James <sam@gentoo.org> (2021-01-19)
-# Joonas Niilola <juippis@gentoo.org> (2021-01-10)
-# Test-dep needs keywording on multiple arches, best to just mask it
-# globally for now. Resolves issue by b5248bbb1b5
-# bug #766147
-app-text/enchant test
-
 # Joonas Niilola <juippis@gentoo.org> (2021-01-15)
 # Dependency not keyworded on this arch.
 app-text/enchant voikko